Phoseon FIREFLY UV LED Curing Array

The Phoseon FIREFLY System is a desktop instrument that generates a flood of high intensity, single peak wavelength of UV light for the curing of links, coatings and adhesives at up to 4000mw/cm2 between 380 and 410nm

The light sources are arrays of semiconductor light emitting diodes (LEDs) mounted using a unique,  method, to create a high yet linear spread intensity of irradiation.

These LED UV Curing products have been developed primarily to demonstrate the features and benefits of generating UV from LEDs rather than from conventional bulb technology for curing applications.

The energy content of UV light has been successfully used for more than 30 years for the photopolymerisation of surface coatings. More recently UV is being used in broader applications for the rapid curing of adhesives, paints and inks. Photopolymer chemistry offers an attractive alternative to solvent based systems with the environmental issues of power hungry furnaces and the removal of volatile organic compounds.

The STARFIRE LED arrays are built into a remote housing connected to the main instrument via an umbilical flexible hosting, supplying the necessary power, cooling and temperature sensing. This enables the array to be positioned close to the items being cured.

Arrays are air or water cooled, in which case the main instrument houses the water cooling heat exchanger and pump, the necessary power supplies and a microprocessor board with display for the control of the LED intensity and switch-on times.

Applications

These versatile instruments provide a precision method of initiating a photo-chemical reaction, not possible with conventional bulb technology. The LEDs can be switched on instantaneously with no warm up required.

The light source can be positioned close up to the substrate without the danger of heat damage as no I.R. is generated from the LEDs. A uniform intensity of irradiation is produced over he full area of the array which ensures an even cure across this area.

The instrument can be programmed for either a single power level or a variable cure profile.

Short pulses can be produced to simulate substrates moving under conveyors so that in-line processes utilizing UV LED curing can be simulated.
                                          

Phoseon STARFIRE MAX UV Curing Array

The RX Starfire MAX is a water cooled high intensity UV light “bar” with configurable emitting lengths of 75mm, 150mm & 300mm with an emitting width of 20mm. Industrial UV curing applications for printing, coatingsand adhesives can now gain the proven advantages of high-intensity LEDbased ultraviolet light. As the world leader in delivering high power, UV-LED technology, Phoseon Technology pioneered the Semiconductor Light Matrix (SLMTM). With SLM technology, OEMs can manufacture the environmentally cleanest, coolest operating, and most efficient UV-based systems commercially.

Comprising:
75, 150 or 300mm x 20 mm LED array
1 metre flexible cable to power supply

• Water cooled to max 8°C above room temp
• Peak output 394nm, max 4000mw/cm2 between 380/405nm
• Quartz screen to protect LEDs
  
  Power supply:
• Including water-cooling unit, fan, water tank and pump
• Including stable LED power supply
• Control system allows LED outputs from 1% to 100% in 1% increments
• Exposure programme control allows timed and continuous exposure
• On to max power 2 milliseconds
• 10 separate programmes can be selected

Phoseon FireFlex UV Curing Array

The RX FireFlex is a water cooled high intensity UV light “bar” with a configurable emitting lengths up to 2m and emitting width of 50mm length. Industrial UV curing applications for printing, coatings , and adhesives can now gain the proven advantages of high-intensity LED based ultraviolet light. As the world leader in delivering high power, UV-LED technology, Phoseon Technology pioneered the Semiconductor Light Matrix (SLMTM). With SLMTM technology, OEMs can manufacture the environmentally cleanest, coolest operating, and most efficient UV-based systems commercially available.

Phoseon FireEdge UV Curing Array

The RX FireEdge is an air cooled high intensity UV light “bar” with a narrow emitting width and 75mm emitting length particularly suited for UV inkjet pinning. Industrial UV curing applications for printing, coatings , and adhesives can now gain the proven advantages of high-intensity LEDbased ultraviolet light. As the world leader in delivering high power, UV-LED technology, Phoseon Technology pioneered the Semiconductor Light Matrix (SLMTM). With SLMTM technology, OEMs can manufacture the environmentally cleanest, coolest operating, and most efficient UV-based systems commercially available

Exfo LX 300 UV Spot Curing System

With peak irradiance intensity of 8,000mW/cm2, and up to four LED heads installed, the OmniCure® LX300 LED UV Spot Curing System provides the highest power and most reliable 365nm LED technology currently available with the option of full or half power output. Where multiple LED heads are required, irradiance on each head is uncompromised and consistent.

Click here to download the Exfo LX300 brochure

Jenton International UK
9/10 Ardglen Industrial Estate, Evingar Road, Whitchurch, HAMPSHIRE  RG28 7BB
UNITED KINGDOM
Tel:+44 (0)1256 892194    Fax:+44 (0)1256 89648

FIND US  | NEWS | EVENTS  |  ENQUIRIES
LED Curing Pen  :  LED Curing Systems   :  LED Curing Technology

   www.gentec.be

   www.gentec.be

   www.igb-tech.de